Analýza příčin rozdílné doby cyklu u duplicitní formy na vstřikování plastů – Bc. Jan Vysokai
Bc. Jan Vysokai
Master's thesis
Analýza příčin rozdílné doby cyklu u duplicitní formy na vstřikování plastů
Abstract:
Diplomová práce se zabývá porovnáním dvou forem na výrobu stejného dílu. Práce analyzuje obě formy a poukazuje na problematické části, které způsobují rozdíly ve výrobních cyklech a kvalitě dílů. Analýza rozebírá jednotlivé části výroby dílu a zjišťuje nutné změny k celkové optimalizaci formy. Doporučené optimalizace obsahují odvzdušnění formy, konstrukce chladících kanálů, průtoku chladiva, změny …moreAbstract:
The thesis deals with the comparison of two molds for the production of the same part. The thesis analyzes both molds and points to problematic places that cause differences in production cycles and quality of parts. The analysis goes through the individual parts of the part production and determines the necessary changes to the overall mold optimization. Recommended optimizations include venting the …more
Language used: Czech
Date on which the thesis was submitted / produced: 2. 5. 2019
Thesis defence
- Supervisor: prof. Dr. Ing. Petr Lenfeld
Citation record
ISO 690-compliant citation record:
VYSOKAI, Jan. \textit{Analýza příčin rozdílné doby cyklu u duplicitní formy na vstřikování plastů}. Online. Master's thesis. Liberec: Technical University of Liberec, Faculty of Mechanical Engineering. 2019. Available from: https://theses.cz/id/3uuhm1/.
The right form of listing the thesis as a source quoted
Vysokai, Jan. Analýza příčin rozdílné doby cyklu u duplicitní formy na vstřikování plastů. Liberec, 2019. diplomová práce (Ing.). Technická univerzita v Liberci. Fakulta strojní
Full text of thesis
Contents of on-line thesis archive
Published in Theses:- Soubory jsou nedostupné.
Other ways of accessing the text
Institution archiving the thesis and making it accessible: Technická univerzita v Liberci, Fakulta strojníTechnical University of Liberec
Faculty of Mechanical EngineeringMaster programme / field:
Mechanical Engineering / Engineering Technology and Materials
Theses on a related topic
-
Konstrukce vstřikovací formy pro navržený díl
Jakub Bittner -
Konstrukce formy pro tlakové lití odlitku ze slitin hliníku
Jiří Janoušek -
Konstrukční návrh vstřikovací formy pro výrobu plastového dílu
Pavel Malík -
Konstrukční úprava stírací vložky formy pro snížení adhezivního opotřebení.
Michal ZÖLD -
Konstrukce vstřikovací formy pro výrobu části světlometu
Ondřej Pavlíček -
Analýza vlivu ošetření formy mikropostřikem ve vztahu ke kvalitě odlitku bloku motoru 1.0. MPI EVO
Patrik Fiebiger -
Návrh moderní vstřikovací formy pro zvýšení účinnosti chlazení
Tomáš Zvoníček -
Posouzení vhodnosti umístnění nárazníků v rozváděcích kanálech vtokového systému tlakové licí formy s ohledem na homogenitu odlitku
Michal Dvořák