Diagnostic System for Low-speed Bearings

Dipl.-Ing. Michael Oeljeklaus

Disertační práce

Anotace:

This thesis resolves the current issue of running diagnostics on low-speed bearings and has resulted from urgent industry requirements. The central concept of the design solution is the introduction of a reference element into the sprocket shaft bearing assembly of a chain conveyor used in the ŠKODA AUTO a.s. paint shop. Using two pairs of roller bearings each, this reference element is connected to both the shaft as well as the frame. With this design, the reference element can freely rotate, thereby making it possible to run diagnostics on the bearings. Firstly, this design makes it possible to rotate the reference element at a high speed and - just like for high-speed bearings - establish the frequency of the vibrations, determining the level of damage in doing so. Secondly, it makes it possible to identify and measure the resistance when rotating the reference element. This design solution has been successfully patented at a European level. In the course of this thesis, various designs have been developed, one of which has been realised as a prototype and integrated into the conveyor system at the ŠKODA AUTO a.s. paint shop in Mladá Boleslav.

Abstract:

This thesis resolves the current issue of running diagnostics on low-speed bearings and has resulted from urgent industry requirements. The central concept of the design solution is the introduction of a reference element into the sprocket shaft bearing assembly of a chain conveyor used in the ŠKODA AUTO a.s. paint shop. Using two pairs of roller bearings each, this reference element is connected to both the shaft as well as the frame. With this design, the reference element can freely rotate, thereby making it possible to run diagnostics on the bearings. Firstly, this design makes it possible to rotate the reference element at a high speed and - just like for high-speed bearings - establish the frequency of the vibrations, determining the level of damage in doing so. Secondly, it makes it possible to identify and measure the resistance when rotating the reference element. This design solution has been successfully patented at a European level. In the course of this thesis, various designs have been developed, one of which has been realised as a prototype and integrated into the conveyor system at the ŠKODA AUTO a.s. paint shop in Mladá Boleslav.

Klíčová slova

low-speed bearings, damage identification, diagnostics of bearings, resistance diagnostics, vibration diagnostics

Jazyk práce: čeština

Datum vytvoření / odevzdání či podání práce: 8. 3. 2019

Obhajoba závěrečné práce

• Vedoucí: prof. Ing. Lubomír Pešík, CSc.

Technická univerzita v Liberci

Fakulta strojní

Doktorský studijní program / obor:
Machines and Equipment / Machine and Equipment Design