Analýza drsnosti povrchu po obrábění technologií WEDM – Jan Kantor
Jan Kantor
Bachelor's thesis
Analýza drsnosti povrchu po obrábění technologií WEDM
Analysis of Surface Roughness after Wire Electro-Dischrage Machining.
Abstract:
Bakalářská práce se zabývá elektroerozivním drátovým řezáním. V úvodní části této práce je popsána teorie nekonvenční metody obrábění, rozdělení metod, princip, hlavní parametry obrábění zahrnující charakteristiky výkonu, výboje, parametry drátu a výplachu. V další kapitole teoretické části je popsána teorie elektroerozivního drátového řezání. V závěru teoretické části jsou popsány parametry drsnosti …moreAbstract:
The bachelor thesis deals with electroerosive wire cutting. In the introductory part of this thesis, the theory of unconventional machining method, distribution of methods, principle, main machining parameters including power characteristics, discharge, wire and washout parameters are described. In the next chapter of the theoretical part, the theory of WEDM cutting is described. At the end of the …more
Language used: Czech
Date on which the thesis was submitted / produced: 13. 5. 2024
Identifier:
http://hdl.handle.net/10084/154269
Thesis defence
- Date of defence: 4. 6. 2024
- Supervisor: Radim Vlček
- Reader: Martin Janoško
Citation record
Full text of thesis
Accessibility: Plné texty vysokoškolských kvalifikačních prací obhájených na Vysoké škole báňské - Technické univerzitě Ostrava jsou uloženy v repozitáři DSpace. Přístup k plným textům mají všichni uživatelé bez omezení. Přístup je omezen pouze ve výjimečných případech, zpravidla z důvodu ochrany duševního vlastnictví. Nepřístupné práce jsou označeny jako closedAccess nebo embargoedAccess. Tištěné verze prácí jsou uloženy v Ústřední knihovně VŠB-TUO a jsou prezenčně přístupné ve studovně diplomových prací. Další nakládání s prací (kopírování, opisy, MVS)se řídí Knihovní a výpůjčním řádem Ústřední knihovny VŠB-TUO.
Contents of on-line thesis archive
Published in Theses:- autentizovaným zaměstnancům ze stejné školy/fakulty
Other ways of accessing the text
Institution archiving the thesis and making it accessible: VŠB – Technická univerzita OstravaVSB – Technical University of Ostrava
Fakulta strojníBachelor programme / field:
Strojírenství / Strojírenská technologie
Theses on a related topic
-
Využití nekonvenčních metod obrábění pro přesné dělení materiálu
Petr Kučera -
Nekonvenční způsoby obrábění strojních součástí
Martin Burian -
Nekonvenční metody obrábění
Petr Chalupa -
Racionalizace upínání obrobku pro elektroerozivní drátové řezání
Denisa Šídová -
Elektroerozivní drátové řezání technické keramiky
Mária Habovštiaková -
Rozbor a využití elektroerozivní technologie drátového řezání
Josef Patočka -
Elektroerozivní drátové řezání a návrh materiálu střižníků ve firmě MASSAG Stamping a. s.
Tomáš Klein -
Elektroerozivní drátové řezání.
Pavel Bartoš