Návrh a kvalifikace oprav svarových spojů na JE metodou WELD OVERLAY – Bc. Michal NOREK
Bc. Michal NOREK
Master's thesis
Návrh a kvalifikace oprav svarových spojů na JE metodou WELD OVERLAY
Abstract:
Tato diplomová práce se zabývá novým způsobem oprav svarových spojů na JE v České republice. Nová metoda oprav svarových spojů je efektivnější a rychlejší než původní metody oprav. Principem je, že se provede návar na původní svarový spoj, kde byla indikována trhlina a tento návar vytvoří bandáž k zastavení šíření trhliny. Metoda se testuje pro materiály 22K a 08Ch18N10T. Jako přídavný materiál je …moreAbstract:
This thesis solves the new method of repair of welds. This method of repair is named WOL (overlay). The new method is more economical and cheaper than current method. The principle of the WOL method is the overlay weld on original weld, where the defect is indicated. In the Czech nuclear power plant the Russian materials are used. These are carbon steel 22K and austenitic steel 08Ch18N10T. The most …more
Language used: Czech
Date on which the thesis was submitted / produced: 2. 6. 2017
Accessible from:: 31. 12. 2999
Thesis defence
- Supervisor: Prof. Dr. Ing. Antonín Kříž
Citation record
ISO 690-compliant citation record:
NOREK, Michal. \textit{Návrh a kvalifikace oprav svarových spojů na JE metodou WELD OVERLAY}. Online. Master's thesis. Plzeň: University of West Bohemia, Faculty of Mechanical Engineering. 2017. Available from: https://theses.cz/id/f9pdwe/.
The right form of listing the thesis as a source quoted
NOREK, Michal. Návrh a kvalifikace oprav svarových spojů na JE metodou WELD OVERLAY. Plzeň, 2017. diplomová práce (Ing.). ZÁPADOČESKÁ UNIVERZITA V PLZNI. Fakulta strojní
Full text of thesis
Accessibility: Autor si nepřeje zpřístupnění práce veřejnosti
Contents of on-line thesis archive
Published in Theses:- Soubory jsou nedostupné.
Other ways of accessing the text
Institution archiving the thesis and making it accessible: ZÁPADOČESKÁ UNIVERZITA V PLZNI, Fakulta strojníVázaný výtisk práce naleznete v Univerzitní knihovně ZČU, více na http://www.knihovna.zcu.cz/kvalifikacni-prace/
University of West Bohemia
Faculty of Mechanical EngineeringMaster programme / field:
Mechanical Engineering / Materials Engineering and Engineering Metallurgy
Theses on a related topic
-
Faktory ovlivňující strukturní stav vysoko legované části heterogenního svarového spoje
Aleš Návoj -
Vliv rostoucí agresivity korozního prostředí na vrubový účinek korozního poškození svarového spoje
Vilém VESELÝ -
Opravné svařování heterogeního svarového spoje
Petr Žváček -
Studium struktury a vlastností svarového spoje ocelí P92 a CB2 pro turbíny s ultra super kritickými parametry páry
Marcela ŠTĚRBOVÁ -
Ověření technologie svařování heterogenního svarového spoje
Radek Byrtus -
Lomové chování tepelně ovlivněné oblasti heterogenního svarového spoje
Vladimír Jelínek -
Experimentální hodnocení heterogenních svarových spojů potrubních tras havarijního napájení parogenerátorů
Ondřej Hlaváček -
Svařování heterogenních svarových spojů Ti/Al slitin pomocí elektronového svazku
Petr Havlík