Vliv technologie obrábění na tvarové a kvalitativní parametry obrobené plochy žárového nástřiku Cr-Ni-B-Si – Bc. Marek BABÁK
Bc. Marek BABÁK
Master's thesis
Vliv technologie obrábění na tvarové a kvalitativní parametry obrobené plochy žárového nástřiku Cr-Ni-B-Si
Influence of machining technology on shape and qualitative parameters of machined surface of Cr-Ni-B-Si
Abstract:
Diplomová práce se zabývá obrobitelností žárového nástřiku Cr-Ni-B-Si na tvarově složité ploše pomocí frézování. V úvodu je v práci rešeršní část a část teoretická. Následuje část praktická s popisem potřebného vybavení pro realizaci experimentu a vlastní vyhodnocení experimentu. Vyhodnocujeme opotřebení VBD, drsnost povrchu a výsledný rozměr dílu. Na závěr je provedeno technicko-ekonomické hodnocení …moreAbstract:
The diploma thesis deals with the machinability of Cr-Ni-B-Si thermal spraying on a complex surface by milling. In the introduction there is a research part and a theoretical part. The following is a practical part with a description of the necessary equipment for the implementation of the experiment and the actual evaluation of the experiment. We evaluate VBD wear, surface roughness and the resulting …more
Language used: Czech
Date on which the thesis was submitted / produced: 31. 7. 2020
Accessible from:: 31. 12. 2999
Thesis defence
- Supervisor: Ing. Miroslav Gombár, PhD.
Citation record
ISO 690-compliant citation record:
BABÁK, Marek. \textit{Vliv technologie obrábění na tvarové a kvalitativní parametry obrobené plochy žárového nástřiku Cr-Ni-B-Si}. Online. Master's thesis. Plzeň: University of West Bohemia, Faculty of Mechanical Engineering. 2020. Available from: https://theses.cz/id/faje2b/.
The right form of listing the thesis as a source quoted
BABÁK, Marek. Vliv technologie obrábění na tvarové a kvalitativní parametry obrobené plochy žárového nástřiku Cr-Ni-B-Si. Plzeň, 2020. diplomová práce (Ing.). ZÁPADOČESKÁ UNIVERZITA V PLZNI. Fakulta strojní
Full text of thesis
Accessibility: Autor si nepřeje zpřístupnění práce veřejnosti
Contents of on-line thesis archive
Published in Theses:- Soubory jsou nedostupné.
Other ways of accessing the text
Institution archiving the thesis and making it accessible: ZÁPADOČESKÁ UNIVERZITA V PLZNI, Fakulta strojníVázaný výtisk práce naleznete v Univerzitní knihovně ZČU, více na http://www.knihovna.zcu.cz/kvalifikacni-prace/
University of West Bohemia
Faculty of Mechanical EngineeringMaster programme / field:
Mechanical Engineering / Manufacturing Processes - Technology of Metal Cutting
Theses on a related topic
-
Třískové obrábění a jeho vliv na drsnost povrchu
Lukáš Merhout -
Parametry obrábění ovlivňující drsnost povrchu
Jaroslav Žalud -
Návrh nejvhodnější technologie obrábění čepů s ohledem na požadovanou drsnost povrchu
Vojtěch Staněk -
Vliv řezné rychlosti na přesnost a drsnost obrobeného povrchu technologií víceosého frézování
Jiří Krejsek -
Vliv volby nástroje na jakost povrchu formy
Petr Mana -
Hodnocení profilu povrchu a geometrické přesnosti broušeného povrchu mosazi
Jiří HORÁK -
Vliv materiálu na kvalitu povrchu u třískového obrábění
Jindřich Škoch -
Vliv kvality řezného povrchu nástroje na proces obrábění
Jan Zlámal