Využití systému Kovoprog při obrábění tvarových ploch – David PETRŮ
David PETRŮ
Bachelor's thesis
Využití systému Kovoprog při obrábění tvarových ploch
Use of Kovoprog when machining contoured surfaces
Abstract:
Hlavním cílem této bakalářské práce je shromáždění informací o možnostech systému Kovoprog při obrábění tvarových ploch ( rotačních i nerotačních ). Práce obsahuje analýzu současných CAM systémů, popis systému Kovoprog a možnosti při obrábění tvarových ploch, technickou dokumentaci ukázkové součásti a jako poslední bod stručný popis při vytváření NC programu v systému Kovoprog. Hlavním aktivem této …moreAbstract:
The main objective of this work is to collect information about how the system Kovoprog when machining contoured surfaces (non-rotating and rotating). The work includes analysis of current CAM systems, system description Kovoprog and options when machining contoured surfaces, technical documentation, sample parts and finally a brief description to create the NC program in Kovoprog. The main asset of …more
Language used: Czech
Date on which the thesis was submitted / produced: 28. 6. 2012
Accessible from:: 28. 6. 2012
Thesis defence
- Supervisor: Doc. Ing. Jiří Česánek, Ph.D.
Citation record
The right form of listing the thesis as a source quoted
PETRŮ, David. Využití systému Kovoprog při obrábění tvarových ploch. Plzeň, 2012. bakalářská práce (Bc.). ZÁPADOČESKÁ UNIVERZITA V PLZNI. Fakulta strojní
Full text of thesis
Accessibility: Autor si přeje zpřístupnit práci veřejnosti od 28.6.2012
Contents of on-line thesis archive
Published in Theses:- Soubory jsou od 28. 6. 2012 dostupné: světu
Other ways of accessing the text
Institution archiving the thesis and making it accessible: ZÁPADOČESKÁ UNIVERZITA V PLZNI, Fakulta strojníUniversity of West Bohemia
Faculty of Mechanical EngineeringBachelor programme / field:
Engineering / Programming of NC Machines
Theses on a related topic
-
Databáze upínacích přípravků v CAM systému
Ondřej Juřena -
Tvorba kinematiky vyvrtávacích hlav pro simulaci v CAM systému
Dominik JANÁČEK -
Racionalizace frézování tvarových ploch s využitím CAM systému
Radim Janeczko -
Databáze řezných nástrojů a rotačních upínačů nástrojů v CAM systému
Michal Večerek -
Ověření databáze upínacích přípravků v CAM systému WorkNC
Tomáš Matušík -
Racionalizace frézování tvarových ploch s využitím CAM systému
Ondřej Bajger -
Ověření postprocesoru CAD/CAM systému HyperMILL pro frézku Hermle C250
Pavel Matějka -
Verifikace frézovacího centra DMU 50 v CAM systému Mastercam
Petr Hamrozi