Tenkovrstvé povlaky na bázi kovových skel Zr-Hf-Cu – Bc. Kseniia HUTSALO, M.Sc.
Bc. Kseniia HUTSALO, M.Sc.
Master's thesis
Tenkovrstvé povlaky na bázi kovových skel Zr-Hf-Cu
Abstract:
V rámci diplomové práce byly připraveny tři série vrstev Zr-Hf-Cu, které jsou deponovány vysokovýkonovým pulzním magnetronovým nazprašováním HiPIMS v depoziční komoře. Depozice byly prováděny v atmosféře argonu. Základní tlak před každým ukládáním byl nižší než 5×10-5 Pa. První série byla s obsahem 46 at.% Cu, zatímco druhá série byla s 59 at.% Cu a třetí byla s 68 at.% Cu. Cílem bylo zhodnotit vliv …moreAbstract:
As part of the diploma thesis were prepared three series of Zr-Hf-Cu layers, applied by highly efficient HiPIMS pulse magnetron sputtering in the deposition chamber. The depositions were performed in an atmosphere of argon. The basic pressure before each depositing was less than 5x10-5 Pa. The first series contained 46 at.% Cu, while the second series had 59 at.% Cu and the third one 68 at.% Cu. The …more
Language used: Czech
Date on which the thesis was submitted / produced: 13. 7. 2018
Accessible from:: 31. 12. 2999
Thesis defence
- Supervisor: Doc. Ing. Petr Zeman, Ph.D.
Citation record
The right form of listing the thesis as a source quoted
HUTSALO, Kseniia. Tenkovrstvé povlaky na bázi kovových skel Zr-Hf-Cu. Plzeň, 2018. diplomová práce (Ing.). ZÁPADOČESKÁ UNIVERZITA V PLZNI. Fakulta aplikovaných věd
Full text of thesis
Accessibility: Autor si nepřeje zpřístupnění práce veřejnosti
Contents of on-line thesis archive
Published in Theses:- Soubory jsou nedostupné.
Other ways of accessing the text
Institution archiving the thesis and making it accessible: ZÁPADOČESKÁ UNIVERZITA V PLZNI, Fakulta aplikovaných vědVázaný výtisk práce naleznete v Univerzitní knihovně ZČU, více na http://www.knihovna.zcu.cz/kvalifikacni-prace/
University of West Bohemia
Faculty of Applied SciencesMaster programme / field:
Applied Sciences and Computer Engineering / Applied Physics and Physical Engineering
Theses on a related topic
-
Magnetronové naprašování senzoricky aktivních nanostruktur na bázi plazmonických materiálů
Alexej HORÁK -
Magnetronové naprašování vrstev s vylepšenými mechanickými a tribologickými vlastnostmi
Daniel JAVDOŠŇÁK -
Magnetronově naprašovaná tenkovrstvá kovová skla a jejich charakterizace
Michaela KOTRLOVÁ -
Reaktivní magnetronové naprašování vrstev Ti-Ni-N
Zuzana ČIPEROVÁ