Zvýšení kvality broušeného povrchu z materiálu Inconel 718 – Bc. Šimon ŘEZNÍČEK
Bc. Šimon ŘEZNÍČEK
Master's thesis
Zvýšení kvality broušeného povrchu z materiálu Inconel 718
Increasing of the surface quality when Inconel 718 is grinded
Abstract:
Tato diplomová práce se zabývá zvýšením jakosti broušeného povrchu materiálu Inconel 718 na nástrojářské 5osé brusce. Cílem je navržení nových chladících trysek pro přívod řezné kapaliny vyrobených pomocí 3D tisku z kovu. Bylo dosaženo neuspokojivých výsledků, co se týče drsnosti povrchu v případě většiny použitých trysek. Tryska s jednodušší geometrií inspirovaná designem podle Webstera z roku 1995 …moreAbstract:
This thesis deals with increasing of the surface quality when Inconel 718 is grinded on a 5-axis tool grinder. The aim is to design new cooling nozzles for the supply of cutting fluid manufactured using 3D metal printing. Unsatisfactory results were obtained in terms of surface roughness for most of the nozzles used. Nozzle with the simplest geometry inspired by the design from Webster from 1995 achieved …more
Language used: Czech
Date on which the thesis was submitted / produced: 28. 5. 2021
Accessible from:: 31. 12. 2999
Thesis defence
- Supervisor: Doc. Ing. Miroslav Zetek, Ph.D.
Citation record
ISO 690-compliant citation record:
ŘEZNÍČEK, Šimon. \textit{Zvýšení kvality broušeného povrchu z materiálu Inconel 718}. Online. Master's thesis. Plzeň: University of West Bohemia, Faculty of Mechanical Engineering. 2021. Available from: https://theses.cz/id/bk2q7v/.
The right form of listing the thesis as a source quoted
ŘEZNÍČEK, Šimon. Zvýšení kvality broušeného povrchu z materiálu Inconel 718. Plzeň, 2021. diplomová práce (Ing.). ZÁPADOČESKÁ UNIVERZITA V PLZNI. Fakulta strojní
Full text of thesis
Accessibility: Autor si nepřeje zpřístupnění práce veřejnosti
Contents of on-line thesis archive
Published in Theses:- Soubory jsou nedostupné.
Other ways of accessing the text
Institution archiving the thesis and making it accessible: ZÁPADOČESKÁ UNIVERZITA V PLZNI, Fakulta strojníVázaný výtisk práce naleznete v Univerzitní knihovně ZČU, více na http://www.knihovna.zcu.cz/kvalifikacni-prace/
University of West Bohemia
Faculty of Mechanical EngineeringMaster programme / field:
Machining, Additive Technology and Quality Assurance / Machining, Additive Technology and Quality Assurance
Theses on a related topic
-
Vliv tlaku chladicí kapaliny na drsnost povrchu obrobku z korozivzdorných ocelí
Jiří Kasal -
Post procesy po 3D tisku
Tomáš Kůs -
3D tisk tyflomap propojitelných s mobilními zařízeními
Radek BARVÍŘ -
Vliv povrchových úprav slitiny titanu připravené 3D tiskem na výsledné povrchové a korozní charakteristiky
Jindřich Klus -
Vliv řezných podmínek na povrch obrobku při soustružení
Radek Tollinger -
Pod povrch
Petra Pavlíčková -
Povrch těla a jeho vztah k objemu podkožního tuku hodnocený na celotělových 3D modelech
Júlia Dorčáková -
Slzný film a oční povrch v populaci pacientů s kataraktou
Barbora Šálová