Aplikace a porovnání metod kontaktního a bezkontaktního měření deformace – Marek MELZER
Marek MELZER
Bachelor's thesis
Aplikace a porovnání metod kontaktního a bezkontaktního měření deformace
Abstract:
Bakalářská práce se zabývá problémem měření deformace zkušebních vzorků. Deformace vzorků byla měřena kombinací kontaktních a bezkontaktních metod měření. Z naměřených dat se vyhodnotily deformace naměřené jednotlivými metodami. Poté se dosažené výsledky z kontaktního a bezkontaktního měření porovnaly mezi sebou.Abstract:
This thesis deals with the problem of measuring the deformation of the test specimen. Deformation of the specimen was measured by a combination of contact and contactless measurement methods. Using the measured data the results of deflection were evaulated for both methods. Then the results achieved with contact and contactless measurements were compared among themselves.
Language used: Czech
Date on which the thesis was submitted / produced: 2. 6. 2017
Accessible from:: 31. 12. 2999
Thesis defence
- Supervisor: Ing. Petr Beneš, Ph.D.
Citation record
ISO 690-compliant citation record:
MELZER, Marek. \textit{Aplikace a porovnání metod kontaktního a bezkontaktního měření deformace}. Online. Bachelor's thesis. Plzeň: University of West Bohemia, Faculty of Mechanical Engineering. 2017. Available from: https://theses.cz/id/lim9ok/.
The right form of listing the thesis as a source quoted
MELZER, Marek. Aplikace a porovnání metod kontaktního a bezkontaktního měření deformace. Plzeň, 2017. bakalářská práce (Bc.). ZÁPADOČESKÁ UNIVERZITA V PLZNI. Fakulta strojní
Full text of thesis
Accessibility: Autor si nepřeje zpřístupnění práce veřejnosti
Contents of on-line thesis archive
Published in Theses:- Soubory jsou nedostupné.
Other ways of accessing the text
Institution archiving the thesis and making it accessible: ZÁPADOČESKÁ UNIVERZITA V PLZNI, Fakulta strojníVázaný výtisk práce naleznete v Univerzitní knihovně ZČU, více na http://www.knihovna.zcu.cz/kvalifikacni-prace/
University of West Bohemia
Faculty of Mechanical EngineeringBachelor programme / field:
Mechanical Engineering / - Materials Engineering and Engineering Metallurgy
Theses on a related topic
-
Vliv způsobu přípravy zkušebního vzorku na deformace zjišťované systémem ARAMIS
Tomáš Kříž -
Tváření hořčíkové slitiny AZ31 v podmínkách vícenásobné plastické deformace
Marek Messing -
Stanovení vlivu rychlosti deformace na změnu mechanických vlastností při statické zkoušce tahem za tepla
Lukáš Sokolář -
Vliv způsobu přípravy zkušebního vzorku na deformace zjišťované systémem ARAMIS
Tomáš Kříž -
Návrh marketingové strategie pro start-up Freshcut
Aramis Tochjan -
Nezaměstnanost v Praze.
Aramis Tochjan