Simulace elektrického pohonu s otevřeným vinutím napájeného dvojicí napěťových střídačů – Bc. Petr ŠTĚPÁNEK
Bc. Petr ŠTĚPÁNEK
Master's thesis
Simulace elektrického pohonu s otevřeným vinutím napájeného dvojicí napěťových střídačů
Simulation of open-end winding electric drive fed by dual inverters
Abstract:
Předmětem práce je vektorová PWM pro dvojici střídačů napájející společnou zátěž, jakými jsou motory s otevřeným vinutím, kdy každá strana vinutí je napájena jedním 3f střídačem. V zátěži nemusí být jen motorAbstract:
The subject of the work is a vector PWM for a common load-pairing inverter, such as open-wound motors, where each winding side is powered by one 3f inverter. It is not necessary to have a motor in the load
Language used: Czech
Date on which the thesis was submitted / produced: 30. 5. 2019
Accessible from:: 31. 12. 2999
Thesis defence
- Supervisor: Ing. Tomáš Komrska, Ph.D.
Citation record
ISO 690-compliant citation record:
ŠTĚPÁNEK, Petr. \textit{Simulace elektrického pohonu s otevřeným vinutím napájeného dvojicí napěťových střídačů}. Online. Master's thesis. Plzeň: University of West Bohemia, Faculty of Electrical Engineering. 2019. Available from: https://theses.cz/id/nhfor0/.
The right form of listing the thesis as a source quoted
ŠTĚPÁNEK, Petr. Simulace elektrického pohonu s otevřeným vinutím napájeného dvojicí napěťových střídačů. Plzeň, 2019. diplomová práce (Ing.). ZÁPADOČESKÁ UNIVERZITA V PLZNI. Fakulta elektrotechnická
Full text of thesis
Accessibility: Autor si nepřeje zpřístupnění práce veřejnosti
Contents of on-line thesis archive
Published in Theses:- Soubory jsou nedostupné.
Other ways of accessing the text
Institution archiving the thesis and making it accessible: ZÁPADOČESKÁ UNIVERZITA V PLZNI, Fakulta elektrotechnickáVázaný výtisk práce naleznete v Univerzitní knihovně ZČU, více na http://www.knihovna.zcu.cz/kvalifikacni-prace/
University of West Bohemia
Faculty of Electrical EngineeringMaster programme / field:
Electrical Engineering and Informatics / Industrial Electronics and Electromechanical Engineering
Theses on a related topic
-
Návrh pohonu podvozku elektrické vlakové jednotky s vnitřním rámem pomocí PMSM motoru s převodovou skříní
Vladislav LEDECKÝ -
Regulace pohonů s PMSM motory elektrické motokáry
Jiří KRYCH -
Porovnání nasazení kogenerační jednotky s pístovým spalovacím motorem a s plynovou mikroturbínou
Martin Mařík -
Založení podniku Magneton, továrny na elektromagnetické zapalovače, společnosti s r.o., Kroměříž a jeho samostatná existence před začleněním do koncernu Československé zbrojovky, a.s., Brno
Radomír Zavadil -
Porovnání kogenerační jednotky s pístovým spalovacím motorem a s mikroturbínou
Lukáš Majvelder -
Návrh pětifázového trakčního motoru pro použití s injektáží třetí harmonické složky
Martin KREISSL -
Využití laboratorního standu s měniči a motory ve výuce elektrických pohonů
Miroslav Holub -
Koncept jednostopého vozidla s elektrickým pohonem
Tomáš Sirník